use loops
to make bass sounds higher
to have echo
to use distortion like for guitar
to have wah wah pedal, and all in real time.
I have access for guitar distortion and wah wah pedal, but I don't know how to use them to change my voice
I must say that I never used any programs for sound except players, so I don't even know basic principles of this programs, but I learn fast and I'm willing to research and I'm aware that I will need time to get all this gear set up.
So I thought that at least looping I can accomplish with Giada, and I hope for some real time effects. So i guess I need your help.
With the installation I had problem, I downloaded last version 0.7.2., extracted, and then tried to install .deb file with Package Installer. During process it showed error saying
Code: Select all
Your system has broken dependencies. This application can not continue until this is fixed. To fix it run 'gksudo synaptic' or 'sudo apt-get install -f' in a terminal window
But at the program is installed but I guess with some bugs. In config it doesn't recognise my microphone.
I opened it through terminal 'giada_lin' and this the code:
Code: Select all
Giada 0.7.2 setup...
[INIT] loading configuration file...
[KA] using system 0x2
[KA] Opening devices 2 (out), 2 (in), f=44100...
[KA] 3 device(s) found
RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
0)
1) hw:HD-Audio Generic,3
2) default
RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
RtApiAlsa::probeDeviceOpen: unable to synchronize input and output devices.
[KM] using system 0x2
[KM] 1 output MIDI ports found
0) Midi Through:0
[KA] latency = 0
[pluginHost] buffers allocated, buffersize = 2048
RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
This is some things about my computer:
Processor : 4x Intel(R) Core(TM) i3-2328M CPU @ 2.20GHz
Memory : 4008MB (1341MB used)
Operating System : Linux Mint 14 Nadia
-Display-
Resolution : 1366x768 pixels
OpenGL Renderer : Gallium 0.4 on AMD TURKS
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : HDA-Intel - HDA Intel PCH
Audio Adapter : HDA-Intel - HD-Audio Generic
-Input Devices-
AT Translated Set 2 keyboard
Video Bus
Logitech USB Receiver
Logitech USB Receiver
TOSHIBA Web Camera - HD
HDA Intel PCH Mic
HDA Intel PCH Headphone
HD-Audio Generic HDMI/DP,pcm : 3=
SynPS/2 Synaptics TouchPad
-SCSI Disks-
ATA TOSHIBA MK6475GS
TSSTcorp CDDVDW SN-208AB
To summarise
From technical point:
I need to fix program working
I need to make microphone working
From music part:
How to the looping?
And how to add some effects?
Is there some god documentation that can help me with starting program. I know there is 5 video tutorials but is there something more deep?
Does any one can recommend me where to start with whole my idea with beat boxing, looping and effects?